Technical Information

 

LCD Manufacturing Flow

 

 

Lighting Methods

In LCD structure, thin film polarizers are used on the front and the back surfaces of LCD to control light beams passing through liquid crystal cell.  Po Sing provides three types of polarizing films for different applications.  They are classified into Reflective Mode, Transflective Mode & Transmissive Mode.

Reflective Mode  反射模式

Always use in high ambient light environment.

Transflective Mode  半透射模式

Provide intermediate lighting characteristics of reflecting and transmitting.  It can be used in direct sunlight and low light source environment with backlighting. 

 

Transmissive Mode  透射模式

This mode requires backlighting as light source.  It is suitable for insufficient sunlight environment.

  

 

 

Viewing Angles

Normally, viewing angle can be defined by azimuthally angle () measured from horizontal X-axis counter-clockwisely or using time “O’Clock Position” definition.

 

 

Contrast Ratio

Contrast ratio is reflected by the ratio of transmission or reflection brightness of segments at LCD’s ‘ON’ & ‘OFF’ states.

 

 

Connect Modes of LCD Module

According to the need of connection, Po Sing introduces three types of connectors; including Rubber Connector 導電膠條連接, Pin Connector 夾針連接 & Heat Seal Connector 熱壓連接.

 

 

Rubber (Zebra) Connector

Pin Connector

Heat Seal Connector

Mechanism

Mechanical compression connection of conductive rubber and insulating rubber alternately to LCD panel.

Soldering connection of metal pins to LCD panel.

Soldering or mechanical compression connection of electro-conductive film to LCD panel by using heat and pressure fitting.  

Pitch (mm)

Min. 0.50.

1.50, 1.80, 2.00, 2.54, etc.

Min. 0.20.

Advantage

Easy to assembly.

Suitable for small volume manufacturing.

Allow for thin and bend structure.

 

 

Operating Temperature & Storage Temperature

Depending on the application and operating environment, Po Sing provides three types of temperature ranges applied in related LCD panels and modules.

Standard Temp. Range

Low Temp. Range

Wide Temp. Range

Operating Temperature

0  to  +50℃

-20  to  +50℃

-30  to  +70℃

Storage Temperature

-10  to  +60℃

-30  to  +60℃

-40  to  +80℃

Applications

General Equipments,  

Precision Instruments,

Outdoor Applications,

Indoor Applications   Low Temp. Applications   Extreme Temp. Applications  

     Copyright (C) Po Sing Corporation Limited.  All Rights Reserved.